HAZARD WARNING FLASHER
The hazard warning flasher should be
used whenever you find it necessary to
stop the vehicle in a hazardous location.
When you must make such an emer‐
gency stop, always pull off the road as
far as possible.
The hazard warning lights are turned
on by pushing in the hazard switch.
Both turn signal lights will blink. The
hazard warning lights will operate even
though the key is not in the ignition
switch.
To turn the hazard warning lights off,
push the switch again.
Features of your vehicle
4-96
To Next Page
Loading...
Need help?
General
