EasyManua.ls Logo

Kia Cerato - SRS Components and Functions

Kia Cerato
655 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety features of your vehicle
583
SRS components and functions
The SRS consists of the following
components:
1. Driver's front air bag module*
2. Passenger's front air bag module*
3. Side air bag modules*
4. Curtain air bag modules*
5. Retractor pre-tensioner assemblies*
6. Air bag warning light*
7. SRS control module (SRSCM)* /
Rollover sensor*
8. Front impact sensors*
9. Side impact sensors*
10. Passenger’s front air bag
ON/OFF switch*
11. Passenger’s front air bag
ON/OFF lamp*
* : if equipped
The SRSCM continually monitors all
SRS components whilst the is ON to
determine if a crash impact is severe
enough to require air bag deploy-
ment or pre-tensioner seat belt
deployment.
The SRS air bag warning light " "
on the instrument panel will illumi-
nate for about 6 seconds after the
ignition switch is turned to the ON
position, after which the SRS air bag
warning light " " should go out.
OYD036007R
WARNING
If any of the following condi-
tions occurs, this indicates a
malfunction of the SRS. We rec-
ommend that the system be
inspected by an authorised Kia
dealer.
The light does not turn on
briefly when you turn the igni-
tion ON.
The light stays on after illumi-
nating for approximately 6
seconds.
The light comes on whilst the
vehicle is in motion.
The light blinks when the igni-
tion switch is in ON position.

Table of Contents