Safety features of your vehicle
143
Forward and backward adjustment
(if equipped)
The headrest may be adjusted forward
to 4 different positions by pulling the
headrest forward to the desired detent.
To adjust the headrest to it’s furthest
backwards position, pull it fully forward
to the farthest position and release it.
Adjust the headrest so that it properly
supports the head and neck.
Rear seat entry (for 2 door)
The driver and front passenger's
seatback should be tilted to enter the
rear seat.
By pulling up the walk-in seat lever (1)
on the back of the driver and front
passenger’s seatback, the seatback
will tilt forward.Then push the seat for-
ward to allow the occupants to enter.
By pulling up the seatback, the seat-
back will recline and return to the
original position.
OYDDSA2011
WARNING
A gap between the seat and the
headrest release button may
appear when seating on the seat
or when you push or pull the
seat. Be careful not to get your
finger, etc. caught in the gap.
OYD033002/H
To Next Page
Loading...
Need help?
General
