EasyManua.ls Logo

Kia Remote Starter User Manual

Kia Remote Starter
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OWNER’S
GU IDE
Remote
staRt
Kia Logo 4/C - Large
Ta gline @ 70% Black
Part Number: 4280263 REV A
© 2010 KIA MOTORS AMERICA
Vertical Kia Motors Logo 1/C - White
Question and Answer IconNeed help?

Do you have a question about the Kia Remote Starter and is the answer not in the manual?

Kia Remote Starter Specifications

General IconGeneral
ConfirmationAudible and visual confirmation of start
CompatibilitySelect Kia models
FeaturesRemote start, lock/unlock, trunk release
Power SourceVehicle battery
InstallationProfessional installation recommended
ActivationRemote key fob
Safety FeaturesEngine shut-off if brake is pressed, hood open detection

Summary

Introduction

Features and Benefits

Remote Control Operation

Your Remote Control Transmitter

Describes the functions controlled by the remote control keyless entry transmitter for the system.

Arming the Security System

Explains how to arm the security system using the remote control transmitter and its indicators.

Disarming the Security System

Details the process of disarming the security system with the remote control and its feedback.

Opening Trunk/Hatch/Tailgate Glass

Instructions for opening the trunk, hatch, or tailgate glass using the remote control transmitter.

Progressive Car Find

Describes how to use the car find function to locate your vehicle in parking lots.

Personal Protection Alarm

How to activate the panic function on the remote control for personal safety.

Illuminated Entry

Details the courtesy lights that turn on when the system is disarmed or unlocked.

Using the Remote Start Function

Starting Your Vehicle

Step-by-step guide to starting the vehicle remotely using the transmitter.

Remote Start Safety Features

Lists conditions that will automatically shut down the engine during remote start operation.

Entering Vehicle While Running

Procedure for safely entering the vehicle when it is running via the remote start system.

Pre-Heating or Pre-cooling Interior

How to set temperature controls for heating or cooling the interior via remote start.

Using the Quick-Stop Feature

Instructions for leaving the vehicle running temporarily while keeping keys and security.

Using Valet/Service Mode

Engaging Valet/Service Mode

Steps to engage Valet/Service Mode using the ignition and remote control transmitter.

Exiting Valet/Service Mode

Steps to exit Valet/Service Mode and return the system to normal operation.

Security System Functions

When the Security System is Armed

Details how the security system monitors entry points and reacts to triggers.

Pre-Arm Mode

Explains the system's behavior when an entry point is open during arming.

Attempted Theft Alert

How the system alerts you to a trigger that occurred while the vehicle was unattended.

Trip ID

How to identify which entry point caused a security system trigger.

Emergency Override Procedure

Disarming and Starting Vehicle

Procedure to disarm the system and start the vehicle if the remote transmitter is lost or fails.

Changing Remote Control Batteries

Step-by-step instructions for replacing the batteries in the remote control transmitter.

Related product manuals