Kia Remote Starter - Using Valet;Service Mode; Engaging Valet;Service Mode; Exiting Valet;Service Mode

STEERING WHEEL / STALK / PANEL
7
USING VALET/SERVICE MODE
UsingValet/ServiceMode
Service mode is used when servicing the vehicle to prevent the system from unexpectedly starting the engine while being serviced.
While in service mode, the system’s keyless entry functions will operate normally, but the security system will not arm and the
remote start function is temporarily disabled. Thesystemwillhonkthehorn2timesifanattemptismadetoactivatethe
remotestartsystem.
ToEngageValet/ServiceMode;turn the ignition key to the ON or RUN position and press and hold the button for 2 seconds
on the remote control transmitter.
ToExitValet/ServiceMode(Returnthesystemtoitsnormaloperatingmode);turn the ignition key to the ON or RUN position
and press and hold the button for 2 seconds on the remote control transmitter.
Important Note: When taking your vehicle to the dealer for service, it is recommended that you inform the service personnel that
your vehicle is equipped with a remote control start system.