115
5
5
Driving your vehicle Smart Cruise Control (SCC)
Decreasing the set speed
僅 Push down the - switch, and release it
immediately. The set speed will
decrease by 1 km/h (1 mph) each time
the switch is operated in this manner.
僅 Push down the - switch, and hold it
whilst monitoring the set speed on the
cluster. The set speed will decrease by
10 km/h or 5 mph each time the
switch is operated in this manner.
僅 Release the switch at the speed you
want to maintain. You can decrease
the set speed to 30 km/h (20 mph).
Temporarily cancelling Smart
Cruise Control
Press the switch or depress the
brake pedal to temporarily cancel Smart
Cruise Control.
Resuming Smart Cruise Control
To resume Smart Cruise Control after
the function was cancelled, push the +, -
or switch. If you operate the +
switch up or - switch down, vehicle
speed will be set to the current speed on
the cluster.If you press the switch,
vehicle speed will resume to the preset
speed.
Check the driving condition before press
the switch. Driving speed may
sharply increase or decrease when you
press the switch.
Turning off Smart Cruise Control
Press the Driving Assist button to
turn Smart Cruise Control off.
To Next Page
Loading...
