KIC 2000 v2.4.0.x
KIC 2000 User Manual 5
KIC Profiler Technology
The KIC Profiler uses different technology to complete its task of running profiles. The main difference
between it and other profilers is the following:
• Air thermocouple
– For all profiles run with the KIC 2000 software the thermocouple plugged into
the first channel on the SlimKIC 2000 or KIC Explorer must be the Air TC. This TC is positioned
1-inch in front of the leading edge of the board for all profiles run using KIC 2000 software.
• Trigger temperatures
– KIC Profilers use trigger temperatures to start and stop the profile. The Start
temperature is defaulted to 5 degrees above the Maximum Product Start temperature. See Global
Preferences for this setting.
• Hardware Monitor
- The combination of the KIC Profiler and the KIC 2000 software closely
monitors the KIC Profilers battery, internal temperature and the product temperature even before you
start a profile. There are built-in checks in the software to insure that the product and KIC Profliler are
cool enough and battery voltage sufficient to complete a profile safely. As well it will offer
troubleshooting suggestions if there is a problem with communication or thermocouple attachment.
• Perfect Data
– Through patent pending technology the SlimKIC 2000 is able to get you perfect data
every time. At the completion of a profile the SlimKIC 2000 retransmits the data it has stored in its
memory. This insures the integrity of the data, especially if there were any interruptions in the
transmission during the profile.
SlimKIC 2000 Hardware
Inventory
Part Description KIC Part Number
SlimKIC 2000 Transmitter or Data logger (9 or 12 channel) SL2K-4-T/D-09 (12)
SlimKIC 2000 Receiver with antenna (for transmit version only) RE2K-4
Communication Cable CB-RS232-06P
Power Supply (for transmit version only) PS
Thermal Shield TS-SL-18
Individual Color Coded Thermocouples (9 or 12) TC-TK-09-36
Aluminum Tape and Hi-temp Solder for attaching Thermocouples TAPE
SlimKIC 2000 User Manual MAN-SL2K
KIC 2000 software SW-KIC 2000
Optional Software key (Example: Navigator , Auto-Focus) NAV, NAV-AF
KIC Explorer Hardware
Inventory
Part Description KIC Part Number
KIC Explorer Transmitter or Data logger (7 or 12 channel) KE-DL-09 (4)-12 (7)
KIC Explorer Base Station RF Transceiver and antenna REKE-9 (4)
USB Communication Cable CB-KE-DWNLD-06
USB Extension cable 6ft (RF models Only) CBKE-06EXT
Thermal Shield, Stainless Steel, Cool Touch TS-KE-SS-PYR-12 (07)
Thermocouples (7 or 12) TC-TKM-07 (12)
Aluminum Tape and Hi-temp Solder for attaching Thermocouples TAPE
KIC 2000 User Manual MAN-SL2K
KIC 2000 software SW-KIC 2000
Optional Software key (Example: Navigator , Auto-Focus) NAV, NAV-AF