Specifications
Model RMS Power (watts/channel) RMS Power (watts/channel) RMS Power (watts) Dimensions (inches)
@ 12.5V, 4Ω stereo, 0.085% THD, @ 12.5V, 2Ω stereo,0.2% THD, @ 12.5V, 4Ω bridged mono, HxWxL
all channels driven all channels driven 0.2% THD
IX406 40 x 6 55 x 4 115 x 3 2.5x9.5x18.9
Dynamic Power (watts/channel) Dynamic Power (watts/channel) Dynamic Power (watts) Dimensions (mm)
@ 14.4V, 4Ω stereo, 0.085% THD, @ 14.4V, 2Ω stereo, 0.2% THD, @ 14.4V, 4Ω bridged mono, HxWxL
all channels driven all channels driven 0.2% THD
IX406 55 x 6 75 x 6 150 x 3 63x241x482
Frequency Response 20Hz-20kHz ±0.5dB
Input Sensitivity High level 1V-10V
Low level 150mV-3.0V
Signal-to-Noise Ratio >95dB, a-weighted, re: rated power
Active Electronic Crossover 18dB/octave, selectable @ 70Hz or 110 Hz;
KICKEQ™ Bass Boost Variable to +18dB, centered @ 40Hz
KICKEQ™ Treble Boost Variable to +12dB, centered @ 18kHz
To Next Page
Loading...
Need help?
General
