19English
Error Codes
Beeps Reason Troubleshooting Action
1
Tweeter found, but the BI-
AMP switch is off
Enable the BI-AMP switch
2
BI-AMP switch is on, but
there is no sound from a
channel
Make sure all wiring is properly
connected to the correct amplifier
channels.
3
Auto Time Delay failed
- possible blockage or
disconnected speaker
Check speaker connections for
disonnected wire. Avoid physical
barriers. Possible faulty speaker.
4
Auto EQ failed
Make sure Pink Noise is loaded
and playing on the head unit at an
adequately high volume.
5
Front/Rear sensitivity
correction failed
Check speaker connections for
disonnected wire. Avoid physical
barriers. Possible faulty speaker.
6
Too much ambient noise
Make sure any subwoofers are
disconnected, fans are off, engine is off,
windows are rolled up, doors are shut
and external noise is at a minimum.
To Next Page
Loading...
