2
SPECIFICATIONS
Model Max amp Sensitivity Voice Xmax Mounting Outer Mounting
Power Coil Cutout Flange Depth
(watts) (dB 1w/1m) (in./
cm
) (in./
cm
) (in./
cm
) (in./
cm
) (in./
cm
)
SS1155LL77
1000 88.5 2.5 .64 14.1 x 14.1 15.6 x 15.6 8.2
6.35 1.63 35.81 x 35.81 39.6 x 39.6 20.8
SS1122LL5577
750 87.4 2.0 .52 11.2 x 11.2 12.54 x 12.54 6.81
5.08 1.3 28.44 x 28.44 31.85 x 31.85 17.3
SS1100LL77
600 85.7 2.0 .52 9.5 x 9.5 10.66 x 10.66 6.37
5.08 1.3 24.13 x 24.13 27.08 x 27.08 16.2
SS88LL77
450 84.5 2.0 .42 7.6 x 7.6 8.8 x 8.8 4.8
5.08 1.07 19.30 x 19.30 22.35 x 22.35 11.9
Based on measurements of Dual 2 Ohm models
Solo-Baric L7 woofers are available with dual 2 Ohm or dual 4 Ohm voice coils.
Both coils should always be hooked up.
The dual 2 Ohm woofer will give you a 1 Ohm or a 4 Ohm load depending on if
the coils are wired in parallel or in series. The dual 4 Ohm woofer will give a 2
Ohm or 8 Ohm load depending on how they are wired.
The terminals with solid red and black markings are for one voice coil. The ter-
minals with the white dots are for the second voice coil.
Parallel Wiring
Series Wiring
To Next Page
Loading...
Need help?
General