KID Trax KT1122TR - Using the Mickey Mouse Toddler Quad; Charge the Battery

4

 Remove the seat, as described on
page 11. 
 Disconnect the red connectors.
 Plug the charger connector into the
red connector from the baery.
 Only use the Kid Trax
Toys charger included with the Quad
(Input: AC 118V–, 0.5A, 60Hz Output:
DC 6V, 0.6A).
 Plug the charger into a standard
118V wall outlet.  The charger
may feel warm during charging. This
is normal and not a cause for
concern.
 Aer charging is complete (at least
12 hours, but no more than 18)
unplug the charger from the wall
outlet.
 Unplug the charger from the
charging connector and connect the
baery connectors.
 Place the seat back on the vehicle,
and lock into place.
Close
Open
12
 24 hours. Do not charge more than 30 hours
 8-16 hours. Do not charge for more than 24 hours

 Before using the quad for the rst me the baery needs to be charged
for at least 10 to 12 hours. Only an adult who has read and understands the safety
warnings should handle, charge or recharge of the baery.
1
4
2
3