To Next PageTo Next Page
Need help?Do you have a question about the Kidde 10SCO and is the answer not in the manual?
General| Model | 10SCO |
|---|---|
| Type | Smoke and Carbon Monoxide Alarm |
| Test/Reset Button | Yes |
| Silence Feature | Yes |
| Alarm Sound | 85 dB at 10 feet |
| Interconnectability | No |
| Sensor Type | Electrochemical |
| Alarm Type | Smoke and Carbon Monoxide |
| Technology | Electrochemical |
| LED Indicator | Yes |
| Weight | 0.6 pounds |
| Compliance | UL 217, UL 2034 |
Diagram showing the front of the Kidde 10SCO alarm with labeled components.
Diagram showing the back of the Kidde 10SCO alarm with labeled components.
Explains the voice and audible alerts for fire, CO, and low battery conditions.
Details the meaning of green and red LED lights for normal operation and alarm status.
Describes the tamper resist feature that prevents unauthorized removal of the unit.
Explains smoke detection, limitations, and sensor types (ionization vs. photoelectric).
Details how the CO alarm monitors air for CO and provides alerts for high or prolonged low levels.
Guide on ideal locations for installing the Smoke/CO alarm in a home for maximum protection.
Instructions for installing the alarm on sloped ceilings and in static mobile homes.
Details specific locations and conditions where the alarm should not be installed.
Step-by-step instructions for attaching the mounting bracket and the alarm unit.
Procedure for testing the alarm's electronics, CO alarm, and using the HUSH feature.
Details the reset function for CO alarms and how to access peak CO/smoke level memory.
Details the operation of the red and green LED lights for standby, alarm, and memory conditions.
Explains the two tamper resist features for mounting and battery access.
Table detailing the alarm response time based on different CO concentration levels (PPM).
Clarifies that the alarm detects CO from combustion, not other gases.
Instructions on how to remove the alarm unit from its mounting bracket, referencing tamper resist.
Step-by-step guide for replacing the 9V battery in the alarm unit.
Describes the visual and audible indicators for a low battery condition.
Details the chirp indicator that signals the alarm needs replacement after 10 years.
Procedure for monthly cleaning using compressed air or a vacuum cleaner hose.
Lists substances to avoid and precautions during cleaning to prevent damage or voiding warranty.
Explains what Carbon Monoxide is, its dangers, and how it affects the body.
Identifies potential sources of carbon monoxide gas in a residential environment.
Provides safety tips for preventing CO exposure, including appliance maintenance and inspections.
Lists symptoms of carbon monoxide poisoning in adults based on exposure levels (PPM).
Guidance on preparing and practicing a home escape plan, including meeting points.
Covers fire prevention practices like safe smoking, cooking, and the use of fire extinguishers.
Outlines the ten-year limited warranty for defects in material, workmanship, or design.
Provides contact information and procedures for obtaining warranty service or repairs.
Provides consumer hotline number and website for additional information and support.
