5
2. Introduction, Product Features and Specications
Introduction
This alarm detects products of combustion using photoelectric technology.
Ten (10) years after the unit was installed, this unit will automatically alert you that it is time to replace the unit.
This is called “End of Unit Life” mode. See Troubleshooting Guide. To help track the life of your alarm, write the
installation date in the space provided on the side of the alarm.
Product Features and Specications:
• Temperature Operating Range: 0°C to 40°C
• Humidity Operating Range: up to 93% relative humidity (RH), non-condensing
• Audible Alarm: 85+ dB(A) at 3 m, 3.0 to 3.5 KHz pulsing alarm
• Smoke Sensor: Photoelectric
• Smoke Alarm Hush
Control
• Powered by 9V battery
• Storage and Transport Conditions: -20°C to +60°C, 5-95% RH (non-condensing)
To Next Page
Loading...
