23
13. Permanently Disable Alarm / Discharge Battery
WARNING: FAILURE TO DISCHARGE ALARM BATTERY AS INSTRUCTED PRIOR TO
DISPOSAL MAY CREATE POTENTIAL FOR LITHIUM BATTERY RELATED FIRE OR HAZARD.
WARNING: DISCHARGING THE ALARM BATTERY IS PERMANENT
• Once the alarm battery has been discharged, it cannot be reactivated!
• Once discharged, the alarm will NO LONGER DETECT SMOKE OR CO.
• Once the alarm battery is discharged, the battery is depleted and the alarm will no longer function.
• Once the alarm battery has been discharged, the alarm cannot be mounted onto the mounting
bracket or reactivated.
To Permanently Disable Alarm / Discharge Battery:
• Rotate the alarm counterclockwise to remove it from the mounting
bracket.
• Disconnect AC wiring harness.
• Remove SIDE OF TAB from base.
• After the SIDE OF TAB is removed, use the screwdriver to turn the red
slotted arrow to the “PERMANENTLY DISABLE and DISCHARGE ALARM”
location until it clicks/locks into position. This will disable the alarm, stop
the low battery or end of unit life “chirps” and render the alarm safe for
disposal by draining the battery.
Figures 13-A (top) and 13-B (bottom)
To Next Page
Loading...
Need help?
General
