To Next PageTo Next PageWhat to do if my Kidde Smoke Alarm has a low battery?
If your Kidde Smoke Alarm indicates a low battery, you can push the button once to silence the alarm for 24 hours. Pushing the button again will clear the Hush mode and perform a test. Please note that 7 days after the low battery notification begins, it cannot be silenced. If the problem persists, remove the alarm, discharge it, dispose of the unit, and replace it as soon as possible.
How to fix a Smoke Sensor Fault in my Kidde 30CUA10-V?
To address a smoke sensor fault in your Kidde Smoke Alarm, first, refer to the Cleaning Your Alarm section. If the issue persists, try pushing the button once to reset the unit. If the error continues after these steps, remove the alarm, discharge it, dispose of the unit, and replace it as soon as possible.
What to do if my Kidde Smoke Alarm shows a CO Fault?
If your Kidde Smoke Alarm is showing a CO Fault, try pushing the button once to reset the unit. If the error continues, remove the alarm, discharge it, dispose of the unit, and replace it as soon as possible.
How to unstick a button on my Kidde 30CUA10-V Smoke Alarm?
If a button on your Kidde Smoke Alarm is stuck, try pushing it to dislodge it. If the button remains stuck, remove the alarm, discharge it, dispose of the unit, and replace it as soon as possible.
General| Sensor Type | Photoelectric |
|---|---|
| Alarm Sound Level | 85 dB at 10 feet |
| Test Button | Yes |
| Hush Feature | Yes |
| Warranty | 10-year limited warranty |
| Color | White |
| Compliance | UL 217 |
| Power Source | 120V AC with 9V Battery Backup |
| Interconnect | Yes, up to 24 devices |
| Operating Temperature | 40°F (4.4°C) to 100°F (37.8°C) |
| Operating Humidity | 10% to 85% non-condensing |
| Weight | 0.5 lb |
| Features | end-of-life signal |
Indicates AC power connected before battery activation.
Warning for depleted backup battery.
Indicates an issue with the smoke sensor.
Indicates an issue with the CO sensor.
Indicates a critical failure requiring replacement.
Lists key features, sensors, and operating ranges.
Recommended alarm placement for single-level homes.
Recommended alarm placement for multi-level homes.
Guidelines for installing alarms on sloped ceilings.
Electrical specifications and codes for installation.
Detailed steps for connecting the AC harness.
How the alarm functions during normal and alarm conditions.
Procedures for manual and self-testing the alarm.
Explains different chirp sounds and their meanings.
