What to do if my Kidde Smoke Alarm is in End of Unit Life Hush® Mode?
If your Kidde Smoke Alarm is in End of Unit Life Hush mode, remove, discharge, and dispose of the unit, then replace it as soon as possible.
What to do when my Kidde P4010ACS Smoke Alarm signals the end of its life?
When your Kidde Smoke Alarm reaches the end of its life, push and release the Test/Hush button to temporarily silence it. Following this, remove the unit, discharge and dispose of it properly, and replace it as soon as possible.
What to do if my Kidde P4010ACS is in fault mode?
If your Kidde Smoke Alarm is in fault mode, first refer to the Cleaning Your Alarm section. Then, push the Test/Hush button once to attempt to reset the unit. The red LED will blink an error code (number of blinks) when the Test/Hush button is pushed and released. If needed, report the number of blinks to customer service.
Overview of the smoke alarm technology and its purpose.
Key technical details and capabilities of the alarm unit.
Details on electrical connections, code compliance, and interconnectivity.
How the alarm functions during normal use and when sensing smoke.
Procedures for weekly testing of the alarm's functionality.
How the unit samples ambient light for night/day cycles and delays chirps.
Causes and handling of false alarms from smoke, such as cooking.
How to temporarily silence the alarm for nuisance situations.
Monitor circuit for low battery condition and replacement requirements.
Steps for creating and practicing a home escape plan.
Basic fire prevention tips for home safety and precautions.
General| Type | Smoke Alarm |
|---|---|
| Sensor Type | Photoelectric |
| Wireless Interconnect | No |
| Voice Alarm | Yes |
| Smart Features | No |
| Hush Feature | Yes |
| Alarm Loudness | 85 dB |
| LED Indicator | Yes |
| Test Button | Yes |
| Warranty | 10 years |
| Power Source | AC Powered |
| Battery Backup | Yes |
| Interconnectivity | Yes |
To Next Page
