EasyManuals Logo

Kidde KN-COSMXTR-B User Manual

Kidde KN-COSMXTR-B
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
properly located detectors.
When the carbon monoxide alarm sounds:
If alarm signal sounds:
1) Operate the test/reset button
2) Call your emergency
services (Fire Dept. or 911)
3) Immediately move to fresh air - outdoors or by an
open door/window. Do a head count to check that
all persons are accounted for. Do not reenter the
premises nor move away from the open door/
window until the emergency services responders
have arrived, the premises has been aired out, and
your alarm remains in its normal condition.
4) After following steps 1-3, if your alarm reactivates
within a 24 hour period, repeat steps 1-3 and call
a qualified appliance
technician to investigate
for sources of CO from fuel burning equipment and
appliances, and inspect for proper operation of this
equipment. If problems are identified during this
inspection have the equipment serviced immediately.
Note any combustion equipment not inspected by
the technician and consult the manufacturer’s
instructions, or contact the manufacturer’s directly,
for more information about CO safety and this
equipment. Make sure that motor vehicles are not,
and have not been, operating in an attached
garage or adjacent to the residence.
Never restart the source of a CO problem until it has
20
WARNING:
Actuation of your CO Alarm
indicates the presence of
Carbon Monoxide (CO)
which can kill you.
!
PHONE NUMBER
PHONE NUMBER
What To Do When The Alarm Sounds

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kidde KN-COSMXTR-B and is the answer not in the manual?

Kidde KN-COSMXTR-B Specifications

General IconGeneral
BrandKidde
ModelKN-COSMXTR-B
CategorySmoke Alarm
LanguageEnglish

Related product manuals