18
NOTE: The battery activation is a one-time feature. After activation, the battery cannot be
turned off, and can only be discharged at the end of unit life. If the alarm is removed from
the mounting plate, the backup battery will remain active. See Permanently Disable Alarm /
Discharge Battery section.
The alarm is now activated! After installation / activation, test your alarm as described in
Operation and Testing section.
WARNING: FAILURE TO PROPERLY INSTALL AND ACTIVATE THIS ALARM WILL
PREVENT PROPER OPERATION OF THIS ALARM AND WILL PREVENT ITS RESPONSE TO
FIRE HAZARDS.
INTERCONNECT CAPABILITY
This model has AC hardwire alarm interconnect capability. When one hardwire interconnect
unit sounds an alarm, all other compatible hardwire units will also alarm. This model is not
designed to be interconnected with other manufacturer’s products, unless otherwise specified.
AC HARDWIRE INTERCONNECT MODEL COMPATIBILITY
• The following models can be interconnected using the standard AC wiring interconnect:
i12020CA, i12020ACA, i12040CA, i12040ACA, i12060CA, i12060ACA, i12010SCA, i12010SCOCA,
KN-SMFM-I-CA, KN-COB-ICB-CA, KN-COSM-IBCA, KN-COB-IC-CA, KN-COSM-ICA,
KN-COP-IC-CA, KN-COPE-ICA, P12040CA, Pi2000CA, Pi2010CA, SM120X, CO120X,
SLED177iCA, P4010ACLEDSCA, P4010ACLEDSCOCA, P4010ACSCO-WCA, P4010ACSCOCA,
P4010LACS-WCA, P4010ACSCA, P4010ACS-WCA, P4010ACLEDSCA-2, P4010ACLEDSCOCA-2.
To Next Page
Loading...
