Kidde VM-1 Technical Reference Manual

Chapter 3: Operating instructions
P/N 3101890-EN • REV 006 • ISS 21JUN18 55
Note: On NFPA 72 systems, the Change Time command is not available at access level 2.
To set the system clock for the current time:
1. Access the Main Menu, and then select Status.
2. Select Program, and then enter the access level password.
3. Enter the hour, minutes, and seconds. Example: To set the time for 7:27:00 p.m., enter 192700.
Setting the date
Use the Change Date command on the Program Menu to set the system clock for the current date.
Note: On NFPA 72 systems, the Change Date command is not available at access level 2.
To set the system calendar for the current date:
1. Access the Main Menu, and then select Status.
2. Select Program, and then enter the access level password.
3. Enter the day (DD), month (MM) and year (YYYY).
Configuring holiday lists
The Holiday time control is a special time control used to program holidays on a per panel basis. Holiday time
controls supersede the normal VM-CU programmed system time controls on dates that are designated as
holidays. The command is accessed from the Program Menu.
To add a holiday:
1. Access the Main Menu, and then select Program.
2. Select Edit Holiday List, and then select Add Holiday.
3. Enter the holiday month and day.
4. Enter the access level password.
To edit a holiday:
1. Access the Main Menu, and then select Program.
2. Select Edit Holiday List, and then select Edit Holiday.
3. Select the desired holiday, and then enter the correct month and day.
4. Enter the access level password.
To delete a holiday:
1. Access the Main Menu, and then select Program.
2. Select Edit Holiday List, and then select Delete Holiday.
3. Select the desired holiday.
4. Enter the access level password.

Kidde VM-1 Specifications

General

Brand	Kidde
Model	VM-1
Category	Fire Alarms
Language	English