5-34 Application Operation PLZ-U
5.13.2 Factory Default Settings of ABC Preset Memories
The factory default settings of ABC preset memories are indicated in Table 5-8.
Table 5-8 Factory default settings of ABC preset memories
5.13.3 Factory Default Settings of Setup Memories
The factory default settings of setup memories are the combination of the following
three contents.
• Section 5.9, “Configuration Settings” (the underlined values)
• Section 5.13.1, “Factory Default Settings (General)”
• Section 5.13.2, “Factory Default Settings of ABC Preset Memories”
Operation mode Range
PLZ150U PLZ70UA
ABCABC
CC
H 0.000 A 15.000 A 30.000 A 0.000 A 7.500 A 15.000 A
M 0.0000 A 1.5000 A 3.0000 A 0.0000 A 0.7500 A 1.5000 A
L 0.00 mA 150.00 mA 300.00 mA 0.00 mA 75.00 mA 150.00 mA
CR
H OPEN 100.00 mΩ 50.000 mΩ OPEN 200.00 mΩ 100.00 mΩ
M OPEN 1.0000 Ω 500.00 mΩ OPEN 2.0000 Ω 1.0000 Ω
L OPEN 10.000 Ω 5.0000 Ω OPEN 20.000 Ω 10.000 Ω
CV
H 157.50 V
L 15.750 V
To Next Page
