Need help?Do you have a question about the Kilews KL - CTDS and is the answer not in the manual?
Identifies the KL-CTDS model and manufacturer, KILEWS Industrial.
Explains the display screen elements and status indicator lights.
Details the functions of the Up, Down, P, and E/C keys for operation.
Configures time limits, torque values, and thread count parameters.
Sets slow start, auto reverse, auto stop, reconfirm, and alarm behaviors.
Manages NS/AS Stop, torque offset, tool details, and calibration.
Covers device settings, reverse mode, batch mode, and alignment time.
Details Gate Mode, Operation Mode, Auto Learning, Password, and Version.
Accessing initial defaults and managing the key lock status.
Entering and navigating the function menu for parameter adjustment.
Describes the purpose and wiring for external input control connectors.
Describes the purpose and wiring for external output control connectors.
Outlines different switch and manual confirmation methods for operations.
Explains the meaning of various error codes displayed by the device.
Details the interpretation of status codes like OK, NS, and NG for process feedback.
Describes connecting the barcode reader to port 1 via RS232.
Lists serial interface and data frame settings for barcode reader operation.
Explains using barcodes to switch between 1-99 fastening programs.
Describes using a barcode reader to cancel AS confirmation commands.
Explains using a barcode reader to release NS confirmation commands.
Warns about using Kilews-compatible parts and unauthorized modifications.
Provides instructions for safe operation, handling, and storage of the equipment.
Explains the importance and method of electrical grounding for operator safety.
Details data transmission and flow control for CTDS/MCTDS5.
Provides a recommended software control flow and CMD0 content.
Illustrates the communication sequence between the controller and external devices.
Details the format and fields for REQ0 data output from the controller.
Details the format and fields for REQ1 barcode data captured by the controller.
Details the format and fields for DATA0 data output from the controller.
Covers device operation modes, tool stop status, and various data field parameters.
Details the format and fields for the CMD0 data output, including time and checksum.
To Next Page
General