To Next PageTo Next Page
Need help?Do you have a question about the KING CANOPY Garden Party 10ft X 10ft and is the answer not in the manual?
General| Brand | KING CANOPY |
|---|---|
| Model | Garden Party 10ft X 10ft |
| Category | Tent |
| Language | English |
Arrange all pipes and fittings on the ground as instructed before assembly.
Connect center peak fittings and pipes to form the main canopy structure.
Attach corner fittings and pipes to build the canopy's perimeter.
Drape and temporarily secure the canopy cover over the assembled frame.
Secure foot pads to leg pipes and insert legs into corner fittings. Tie cover straps.
Flip valance corners to expose velcro and prepare screen walls for connection.
Align and attach screen walls to valances using hook and loop strips, ensuring proper corner seams.
Connect and zip screen panels together from top to bottom for full enclosure.
Create decorative scallops on screens and tie them back for an open look.
Use wide straps to secure gathered screens to canopy legs for a neat appearance.
Use stakes through grommets for screen stability on soft surfaces.
Measure at least 36 inches from each leg to screw anchors into the ground.
Tie anchor cable or rope around the connector at the top of each canopy leg.
Tie the other end of the rope to the anchor eye and pull tight for stability.
Screw anchors flush with the ground to further secure the anchoring rope.
Keep flame and heat sources away from fabric; it is not fireproof and will burn.
Do not cook, store flammable liquids, or ignite fireworks near the canopy.
Hand wash with mild soap and water; do not bleach, dry clean, or machine wash.
Remove cover before storms, clear accumulated water/snow/ice, and avoid suspending items from the frame.
Free replacement for defective parts with proof of purchase; shipping costs may apply.
Canopy not guaranteed against strong winds, snow, ice, or heavy rain; remove cover if severe weather is predicted.
One-year limited warranty on material and workmanship; requires proof of purchase.
Contact for non-warranty replacement parts and customer service via phone or website.
