To Next PageTo Next Page
Need help?Do you have a question about the KING CANOPY Universal 12ft X 20ft and is the answer not in the manual?
General| Dimensions | 12ft x 20ft |
|---|---|
| Category | Tent |
| Frame Material | Steel |
| Canopy Material | Polyethylene |
| Color | White |
| UV Protection | Yes |
| Water Resistance | Water Resistant |
| Use Case | Outdoor events, parties |
Separate and arrange all pieces by size and shape according to the illustration.
Assemble the center frame first, then proceed to assemble each side.
Unfold the cover with grommets toward the bottom and place it over the frame.
Use elastic ball straps to attach the cover to the frame poles.
Connect leg pipes to connectors and attach foot pads to the bottom of each leg.
Attach hook & loop strips and curtain clips using drawstrings to secure the cover.
Measure 36in from each leg, screw anchors into the ground, leaving 2in exposed.
Tie anchor cable or rope around the top connector and securely to the anchor eye.
Keep flame and heat sources away from fabric; it will burn if in contact with flame.
Hand wash cover with mild soap, avoid machine wash, and remove accumulated water/snow.
Free replacement for defective parts with proof of purchase; shipping terms apply.
One-year limited warranty against defects in material and workmanship.
Contact for non-warranty parts and customer service via phone or website.
