Need help?Do you have a question about the King gates Dynamos 24/600 and is the answer not in the manual?
Securing the foundation plate on a concrete base with M10 nuts for gate alignment.
Attaching the rack to the gate using M6 screws and ensuring correct meshing with the pinion.
Adjusting motor-rack height with screws and securing the gear-motor to the foundation.
Steps to manually disengage the motor and operate the gate during power failure or breakdown.
Procedure to re-engage the motor and return the gate system to automatic operation.
General| Power Supply | 24V DC |
|---|---|
| Motor Power | 600W |
| Max Gate Weight | 600 kg |
| Protection Rating | IP44 |
| Operating Temperature | -20°C to +55°C |
| Motor Type | DC Motor |
To Next Page