To Next PageTo Next Page
Need help?Do you have a question about the King gates Star 224 and is the answer not in the manual?
General| Brand | King gates |
|---|---|
| Model | Star 224 |
| Category | Gate Opener |
| Language | English |
Describes PHO1 input for safety devices during closing operations.
Details PHO2 input for safety devices in both opening and closing operations.
Explains how to enter, exit, and activate the safety device auto-test mode.
Details the HAZ output for hazard lights, including voltage and current specifications.
Describes the antenna input for improving reception range.
Covers the TX output for motion indication lights and its use in safety auto-test.
Specifies the electric latch lock output terminals and power rating.
Lists options for backup battery kits providing emergency power.
Describes the courtesy light output feature and its time range.
Explains the function and states of the SET Yellow LED.
Details the states and meanings of the RADIO Red LED.
Describes the PH Red LED status related to photo-sensors.
Explains the START Green LED indication for start commands.
Covers the ST Red LED status for the STOP input.
Details the ER Red LED for error conditions and travel learning status.
Addresses issues when the red ERROR LED is on and the control unit is non-functional.
Troubleshooting steps for when the gate fails to move.
Solutions for when the gate opens but does not close.
Steps to resolve issues with the remote control not functioning.
Addresses the problem of the gate closing unintentionally.
Solutions for gates stopping midway and reversing direction.
Troubleshooting for gates stopping midway without reversing.
Explains causes and solutions for poor remote control reception range.
Addresses issues with the gate not closing securely against the stopper.
Troubleshooting steps for a jammed manual release mechanism.
