KING OA1000-OE User Manual

Omnidirectional Digital HDTV Over-the-Air Antenna
Installation and Operating Instructions
OA1000 • OA1000-OE • OA1010-OE (White)
OA1001 • OA1001-OE • OA1011-OE (Black)
Thank you for choosing a KING Antenna!
The KING OmniPro is an omnidirectional antenna.
It’s always pointed in the right direction!
Turn on your TV.
Turn on the power injector.*
Start watching TV!Perform a channel scan.**
Sample screen: number of channels will vary
*You must have a properly installed KING wall mount
power injector to operate the KING OmniPro.
KING Wall Mount Power Injector for models:
OA1000 • OA1001 (supplied with this product)
OA1000-OE • OA1001-OE (ordered separately)
OA1010-OE • OA1011-OE (ordered separately)
**See your TV or converter box owner’s manual for
instructions on performing a channel scan.
Installation instructions start on next page.
1
32
OPERATION

KING OA1000-OE Specifications

General

Polarization	Vertical
Impedance	50 Ohms
Radiation Pattern	Omnidirectional
Connector	N-Female
Mounting Style	Mast Mount
Operating Temperature	-40°C to +70°C
Type	Omnidirectional Outdoor Antenna

Summary

Operation Guide

Power On Equipment

Instructions for turning on the TV and the power injector for operation.

Channel Scan Procedure

Steps to perform a channel scan on your TV or converter box.

Start Watching TV

Final step indicating the antenna is ready for use.

Antenna Installation

Select Roof Mounting Location

Guidelines for choosing an appropriate area on the roof for base mount installation.

Connect Coaxial Cable

Instructions for connecting the coaxial cable from the power injector.

Seal Base Mount and Channel

Applying sealant to the base mount and coax channel for waterproofing.

Secure Base Mount

Fastening the base mount to the roof and sealing fastener heads.

Power Injector Information

Power Injector Installation Details

Key considerations and requirements for installing the wall mount power injector.

Limited Warranty Terms