Why is my KING QUEST VQ4200 unit not scanning for satellites?
If your KING Antenna unit isn't scanning for satellites, it could be due to a lack of power reaching the antenna unit. Verify that the antenna unit is properly connected to the controller. Also, check that the controller is receiving power; the LED indicator should be lit.
What to do if my KING QUEST VQ4200 Antenna unit scans but there is no picture on TV?
If your KING Antenna unit scans but you're not getting a picture on your TV, the issue might be with the connections. Ensure the antenna unit is securely connected to the controller, and that the controller is properly plugged in. Also, verify that your powered receiver is connected correctly to both the controller and the TV.
Register your product online for ongoing technical support and warranty processing.
Key details about the KING Quest, its capabilities, and important notices.
Information on setting up the KING Quest for Bell TV service.
Guide on configuring and using the KING Quest for DISH service in the US.
Instructions for applying rubber feet to the antenna unit, with a caution for roof mounting.
Connects the KING Quest antenna to the controller via coax cable.
Connects the controller to the TV receiver using a short coax cable.
Connects the power supply to the controller and AC power.
Details connecting an optional second receiver.
How to enable, disable, and understand the alarm feature of the KING Quest.
Explains how the audible alarm functions when the coax cable is disconnected.
Details satellite configurations for Bell TV and DISH modes.
Steps to change antenna configuration for specific service options.
Guides on positioning the antenna for optimal satellite scanning.
Explains the process of the antenna scanning and locating satellites.
Illustrates which satellites are found based on indicator lights.
Steps to perform a check switch test and configure the receiver for Bell TV.
How to operate the KING Quest for Bell TV viewing.
Steps to connect and configure a second receiver for Bell TV.
Process of downloading program guide to the second receiver.
Steps to program the DISH remote control to the receiver.
Initial steps for setting up the portable antenna for DISH service.
Guide on selecting the correct state for antenna scanning.
Instructions to initiate the scanning process for DISH satellites.
Receiver downloads software for the custom user interface.
Repeating the scan process for DISH.
The process of the receiver acquiring the satellite signal.
Instructions for activating the DISH receiver.
The receiver downloads the electronic program guide.
Initial setup and scanning process for standard DISH operation.
The process of the receiver acquiring the satellite signal.
Downloading the program guide and reauthorizing the receiver.
Important notes on moving the unit and reauthorizing the receiver.
Steps for connecting and configuring a second receiver for DISH.
Performing a check switch test and saving configurations for DISH.
Process of downloading the program guide to the second receiver.
Lists tools, materials, and criteria for choosing an antenna mounting location.
Visual guide for antenna placement and clearance from obstructions.
Steps for securely mounting the antenna unit to the vehicle roof.
Details on connecting coax cables to the MAIN and AUX ports.
Guidance on routing coax cables through the roof.
Information on cutting and terminating coax cables with connectors.
Table of common symptoms, causes, and actions for resolving problems.
How to secure the KING Quest antenna unit using a cable.
Details the MB150 bracket for mounting to the back of a vehicle.
Details the MB500 bracket for hanging on a window or hanger bracket.
Describes MB600 feet for semipermanent roof mounting.
Instructions for handling, cleaning, and protecting the KING Quest.
Guidance on avoiding electrical shock and maintaining the unit.
Information on contacting KING Service Department for support.
Explains the warranty terms, coverage, and return process.
Lists conditions and actions that are not covered by the warranty.
To Next Page
General
