1. Turn on TV and power inserter (see above).
2. Press button and rotate the antenna all of the
way in one direction until it hits the stop.
3. Perform a channel scan per the digital TV or digital TV
converter box manufacturer’s instructions.
Note the number of channels received.
4. Press button and rotate antenna 90 degrees. Scan again.
Note the number of channels received.
5. Press button and rotate antenna 90 degrees. Scan again.
Note the number of channels received.
6. Press button and rotate antenna 90 degrees. Scan again.
Note the number of channels received.
7. Reposition your KING Jack antenna to where you received the most channels.
Choose one of those channels on your TV.
8. Watch TV!
NOTE: In steps 2-6, keep track of the knob position
where you receive the most channels.
AIMING THE ANTENNA
2
2
4
5
6
4
5
6
Digital HDTV Over-the-Air Antenna
OA8400 (White) & OA8401 (Black)
OPERATION
To Next Page
Need help?
General
