Page 15
When the scan is complete, the
Acquiring Signal message will display.
Acquiring the signal may take up to 5 minutes
to complete.
6. After your receiver has acquired the signal, it
is ready to be activated. To activate service
call 1-800-963-DISH (3474).
After your receiver is activated,
the electronic program guide will download.
This may take up to 10 minutes to complete
(potentially longer if an external hard drive
is connected).
This completes the setup for new receivers. You may now use
STANDARD OPERATION WITH DISH RECEIVER starting on the next page for subsequent use.
DISH
To Next Page
Loading...
