Kingfisher FPGTP25-2 - Care and Maintenance

Maintenance table
Inspect and maintain this product regularly based on below
maintenance table.
Part
To do
Before/
after
each use
10
hours
25
hours
50 hours /
half year
100 hours /
once a year
Air filter
clean
X
Spark plug
check
X
Spark plug
clean
X
Spark plug
replace
whenever necessary
Air filter
check
X
Air filter
clean
X
Air filter
replace
whenever necessary
Fuel filter
check
X
Fuel filter
clean
X
Fuel filter
replace
whenever necessary
Cutting attachment and safety guard
>
free of debris. Remove grass trimmings.
Keep the cutting attachment and the safety guard clean and
WARNING! Wear safety gloves when working on the
cutting attachment. Use appropriate tools to remove
debris e.g. a brush or wooden stick! Never use your bare
hands!
In more detail...
Care and maintenance
40
>
with new ones of the same type (refer to “Assembly –
Trimming head“ for detailed instructions how to remove and
attach them).
Replace worn or damaged spools and refill the trimming line
FPGTP25-2
EN