Air filter
Inspect the air filter regularly. Clean or replace with a new
one if necessary.
> Press the latch (B) and remove the cover (A) from the air
filter case (9) (Figs. 17a, 17b).
C
A
B
Fig.17a Fig.17b
> (C)
> Tap the filter on a firm surface to remove dust. Use high
pressure air (max. 3 bar) to remove stubborn dust.
> Apply a small amount of air filter oil on the filter to increase
the filter performance. Wring out surplus oil and put the
filter into the case (9).
> Attach the cover (A); ensure its latch (B) snaps in place.
Remove the air filter .
Spark plug
Inspect the spark plug regularly. Clean or replace with a new
one if necessary.
> Disconnect the spark plug connector (2).
> Loosen the spark plug with the multi tool (23) as spark plug
wrench and carefully remove it.
> Check the spark plug for damage and wear. The colour of
the electrode should be light-brown coloured.
> Remove debris from the electrode with a soft wired brush;
avoid heavy cleaning of the electrode.
> Dry the spark plug with a soft cloth if it is wet from fuel.
> Check the spark plug gap. It should be 0.6 – 0.7 mm
(Fig. 18).
In more detail...
43
FPGTP25-2
Care and maintenance
EN
To Next Page
Loading...
