Kingfisher NMHT450 - Before You Start; Unpacking and Preparation

EN
NMHT450
Getting started...
13
Before you start
Unpacking
1. Unpack all parts and lay them on a at, stable surface.
2. Remove all packing materials and shipping devices if applicable.
3. Make sure the delivery contents are complete and free of any damage. If
you nd that parts are missing or show damage do not use the product but
contact your dealer. Using an incomplete or damaged product represents a
hazard to people and property.
4. Ensure that you have all the accessories and tools needed for assembly and
operation. This also includes suitable personal protective equipment.
WARNING! The product and the packaging are not children’s toys!
Children must not play with plastic bags, sheets and small parts! There
is a danger of choking and suffocation.
You will need
(items not supplied)
Suitable personal protective equipment
Suitable extension cord for outdoor use
Lubricant for blade
(items supplied)
Blade cover (11)
NOTE: The accessories required depend on the intended application.
Ask your dealer for advice.
Setup
WARNING! Before using the product, familiarise yourself with the
operating features read the entire instruction manual paying particular
attention to the safety rules and operating procedures.
Do not connect the product to power supply before removing the blade
cover (11).
Blade cover
1. Remove the blade cover (11) from the cutting device (blade) (1) before
operation (Fig. 1).
2. Keep the blade cover (11) safely.
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 13 9/22/21 4:31 PM