EN
22
EN
In more detail...
NMHT450
Care and maintenance
Storage
1. Switch the product off and disconnect it from the power supply.
2. Clean the product as described above.
3. Attach the blade cover (11) onto the cutting device (blade) (1).
4. Store the product and its accessories in a dark, dry, frost-free, well-ventilated
place.
5. Always store the product in a place that is inaccessible to children. The ideal
storage temperature is between 10 °C and 30 °C.
6. We recommend using the original package for storage or covering the product
with a suitable cloth or enclosure to protect it against dust.
Transportation
1. Switch the product off and disconnect it from the power supply
2. Attach the blade cover (11) onto the cutting device (blade) (1).
3. Always carry the product by its handles (4, 6).
4. Protect the product from any heavy impact or strong vibrations which may
occur during transportation in vehicles.
5. Secure the product to prevent it from slipping or falling over.
Troubleshooting
Suspected malfunctions are often due to causes that the users can x themselves.
Therefore check the product using this section. In most cases the problem can
be solved quickly.
WARNING! Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed
by an authorised service centre or a similarly qualied specialist if you
cannot solve the problem yourself!
Problem Possible cause Solution
1. Product does
not start
1.1. Not connected to power
supply
1.1. Connect to power
supply
1.2. Power cord or plug is
defective
1.2. Check by a specialist
electrician
1.3. Other electrical defect
to the product
1.3. Check by a specialist
electrician
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 22 9/22/21 4:31 PM
To Next Page
Loading...
