Kingfisher NMHT450 - Recycling and Disposal

EN
23
EN
In more detail...
NMHT450
Care and maintenance / Troubleshooting
Troubleshooting
Problem Possible cause Solution
2. Product does
not reach full
power
2.1. Extension cord not
suitable for operation
with this product
2.1. Use a proper extension
cord
2.2. Power source
(e.g. generator) has too
low voltage
2.2. Connect to another
power source
2.3. Air vents are blocked 2.3. Clean the air vents
3. Unsatisfactory
result
3.1. Blade is worn /
damaged
3.1. Replace with a new one
3.2. Thickness of branches
exceeds capacity
3.2. Only cut branches
complying with the
capacity
4. Excessive
vibration or
noise
4.1. Blade is dull / damaged 4.1. Replace with a new one
4.2. Bolts/nuts are loose 4.2. Tighten bolts/nuts
Recycling and disposal
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist.
Check with your Local Authority or local store for recycling advice.
For further information visit www.recycle-more.co.uk.
The product comes in a package that protects it against damage during shipping.
Keep the package until you are sure that all parts have been delivered and the
product is working properly. Recycle the package afterwards.
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 23 9/22/21 4:31 PM