12
NMRS1500
Getting Started . . .
WARNING! The vibration emission value during actual use of the tool can
differ from the declared value depending on the ways in which the tool is
used. Identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all
parts of the operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time). Depending on the
the whole work process including times the product is running under no load
regular maintenance and care of the product and application tools, keeping
The sound intensity level for the operator may exceed 80 dB(A) and ear protection
measures are necessary.
Unpacking
1.
2. Remove all packing materials and shipping devices if applicable.
3.
that parts are missing or show damage do not use the product but contact your
dealer. Using an incomplete or damaged product represents a hazard to people
and property.
4.
Ensure that you have all the accessories and tools needed for assembly and
operation. This also includes suitable personal protective equipment.
You will need
(items not supplied)
>
Suitable personal protective equipment
> Crosshead screwdriver
(items supplied)
> Hex key 4 mm x 1 (26)
Your product / Before you start
3663602627173_MNL_GB_V03.indd 12 30/3/2023 11:49 AM
To Next Page
Loading...