6
NMRS1500
Getting Started . . .
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time of operation, use
low-vibration and lownoise operating modes as well as wear personal protective
equipment.
Take the following points into account to minimize the vibration and noise exposure risks:
1. Only use the product as intended by its design and these instructions.
2. Ensure that the product is in good condition and well maintained.
3. Use correct application tools for the product and ensure they in good condition.
4.
5.
Maintain this product in accordance with these instructions and keep it well lubricated
(where appropriate).
6.
Plan your work schedule to spread any high vibration tool use across a number
of days.
Emergency
Familiarise yourself with the use of this product by means of this instruction
manual. Memorise the safety directions and follow them to the letter. This will
help to prevent risks and hazards.
1.
Always be alert when using this product, so that you can recognise and handle
risks early. Fast intervention can prevent serious injury and damage to property.
2.
Switch off and disconnect from the power supply if there is any malfunction.
before you put it into operation again.
Residual risks
Even if you are operating this product in accordance with all the safety
requirements, potential risks of injury and damage remain. The following dangers
can arise in connection with the structure and design of this product:
1. Health defects resulting from vibration emission if the product is being used over
long periods of time or not adequately managed and properly maintained.
2.
Injuries and damage to property due to broken application tools or the sudden
impact of hidden objects during use.
3.
WARNING!
persons with medical implants to consult their doctor and the medical implant
Safety information
3663602627173_MNL_GB_V03.indd 6 30/3/2023 11:49 AM
To Next Page
Loading...