9
3.3.4 Mileage Calculation (Default ON)
Mileage data is calculated based on the speed from GPS, The vehicle mileage data is
uploaded to the backend along with the vehicle positioning data; the initial mileage
can be configured when initially the device is set up.
3.3.5 Remote Configuration (Default ON)
To remote set device parameters including IP, center number and various of
monitoring parameters via the backend or SMS.
3.3.6 Remote Upgrade (OTA) (Default ON)
As long as GPRS is connected, remote firmware upgrade can be done remotely, if
your SIM card needs to has IP access limitation, we strongly suggest you to
whitelist the below IP for OTA function: 119.23.233.52
3.3.7 Dual IP or Domain (Default ON)
The device supports dual IP connection between the primary server and the standby
server. The default connection is the primary server. If there is a problem with the
primary server, the device automatically switches to the standby server. The primary
server and the standby server can be set in either IP or domain name.
3.3.8 GT800 and JT808 protocol (Default ON)
The device is compatible with GT800 protocol, JT808 protocol, if customer has
already integrate this protocol, no extra integration is required, the devices supports
protocol switch by sending SMS
To Next Page
Loading...