5-6 CK25/30/35
704O505C 704O506C
7. SET THE THROTTLE LEVER TO
ABOUT HALF WAY
6. MOVE THE HYDRAULIC CONTROL
LEVER FORWARD.
To lower implement, move the hydrau-
lic control lever forward.
(1) Position Control Lever
(A) “DOWN”
(1) Hand Throttle Lever
“INCREASE”
“DECREASE”
3. PLACE THE PTO CLUTCH LEVER
IN “OFF” POSITION.
4. PLACE THE SPEED CON-
TROL PEDAL IN “NEUTRAL”
POSITION.
5. PLACE THE RANGE GEAR
SHIFT LEVER (HI-LO) IN
“NEUTRAL” POSITION.
NOTE
zz
zz
z The speed control pedal automati-
cally return to neutral when the
operator's foot is released from the
pedal.
To Next Page
Loading...
