5-22 CK25/30/35
1. Slow the engine to idle
2. Depress the clutch and brake pedal.
(Manual model)
3. After the tractor has stopped, disen-
gage the PTO, lower the implement,
shift the transmission into neutral,
release the clutch pedal and set the
parking brake.
4. H.S.T model: Release the travel
pedal, slow engine to idle.
5. Place HI-LO lever in neutral, follow
number 3 above.
STOPPING HORN
(1) Horn Switch
(2) Horn
only EU, AU type
704O532C
zz
zz
z To avoid personal injury and
maintain optimum control of
tractor, do not use the speed set
device at high speeds or when
driving the tractor on rods.
!!
!!
!
CAUTION
zz
zz
z If you step on the brake, the speed
set device will disengage.
zz
zz
z Make sure to keep the speed set
lever in the off position when start-
ing the tractor.
zz
zz
z Return the speed set lever to the
off position when stopping the
tractor.
zz
zz
z Speed set device will not operate
in reverse.
zz
zz
z The speed control lever can be re-
leased When overloads or any sud-
den forces are obtained.
NOTE
zz
zz
z To prevent the damage of speed
set device, do not depress the
reverse travel side pedal when
the speed set device is engaged.
IMPORTANT
To Next Page
Loading...
