(1) Tread
T66O106A T66O107A
A ROPS and CAB should never be
modied by welding, grinding or cut-
ting, as this can weaken the ROPS
structure. If any components of the
ROPS unit is damaged, it must be
replaced.
If the ROPS unit is removed or loos-
ened for any reason, the parts should
be fitted back to their original posi-
tions and all bolts should be properly
torqued.
Always use seat belt when the
tractor is equipped with a ROPS
and CAB. NEVER USE THE
SEAT BELT WHEN TRACTOR
IS NOT EQUIPPED WITH A
ROPS. (ROPS: Roll-Over Pro-
tective Structures)
NOTE
21. Extra caution should be taken
when driving tractors with narrow
tread widths. For added stabil-
ity you should adjust your rear
wheel tread width.
19. Before starting your tractor you
should depress the clutch and
make sure that all shift levers are
in the neutral position and park-
ing brake is applied.
20. For your safety, a ROPS with a
seat belt is recommended for all
applications.
To Next Page
Loading...
Need help?
General
