- 12 -
OPERATING THE PTO
1. Stay clear of all rotating parts.
2. Keep all safety covers in place at all times.
3. When operating PTO drive equipment, shut off the
engine and wait until the PTO stops before get-
ting off the tractor and disconnecting the equip-
ment. Disengage PTO, stop engine and ensure
all rotating components come to a halt completely
before connecting, disconnecting adjusting or
cleaning any PTO driven equipment.
4. This tractor has a 560-rpm speed when shifting
the PTO control switch to “ON” to engage the PTO
clutch. Set the PTO control switch to “OFF” to dis-
engage the PTO clutch.
5. Do not wear loose clothing when operating the
power take-off when near rotating equipment.
USING 3-POINT HITCH
1. Use 3-point hitch only with equipment designed
for 3-point hitch usage.
2. When using 3-point hitch mounted implement, be
sure to install the proper counter ballast weight
on the tractor.
DIESEL FUEL
1. Under no circumstances should gasoline, alco-
hol or blended fuels be added to diesel fuel.
These combinations can create an increased fire
or explosive hazard. In a closed container such
as a fuel tank these blends are more explosive
than pure gasoline. Do not use these blends.
2. Never remove the fuel cap or refuel with the en-
gine running.
3. Do not smoke while refueling the tractor or when
standing near fuel. Keep any type of open flame
away. Wait for the engine to cool before refueling.
623O006A
623O007A
To Next Page
Loading...
