- 21 -
Glow Plug Indicator Lamp
This shows the condition of preheating in thermo-
starter. When the starter switch is turned to “ON” po-
sition, the lamp is turned to “ON” or “OFF” according
to the temperature of coolant. When the thermo-starter
is preheated, the lamp is turned off. After that, start the
engine.
Light Switch
Turning the light switch one click Clockwise illuminates
the Low Beam headlights and taillights. Next, turning
it one more click illuminates the High Beam headlights.
623O403A
Hazard Lamp Switch
When a hazard lamp switch is pulled to on position,
the hazard lamps blink.
623O404A
PTO Switch
The PTO switch must be placed to the “neutral” posi-
tions before starting the engine. Otherwise, the en-
gine will not start.
To Next Page
Loading...
