A ROPS and CAB should never be
modied by welding, grinding or cut-
ting, as this can weaken the ROPS
structure. If any components of the
ROPS unit is damaged, it must be
replaced.
If the ROPS unit is removed or loos-
ened for any reason, the parts should
be fitted back to their original posi-
tions and all bolts should be properly
torqued.
21. Extra caution should be taken
when driving tractors with nar-
row tread widths. For added sta-
bility you should adjust your rear
wheel tread width, see page 4-29
19. Before starting your tractor you
should depress the clutch and
make sure that all shift levers are
in the neutral position and park-
ing brake is applied.
20. For your safety ROPS
with a seat
belt is recommended for all appli-
cations.
(1) Tread
T66O106a
T66O107a
Always use seat belt when the
tractor is equipped with a ROPS
and CAB. Never use the seat
belt when tractor is not equipped
with a ROPS.
(ROPS: Roll-Over Protective
Structures)
NOTE
To Next Page
Loading...
