If the air cleaner is not in a good con-
dition, the lifetime of the engine can
be shortened, excessive soot can be
produced, and the engine power can
be deteriorated. Therefore, the filter
should be inspected frequently. Its
replacement interval can be changed
according to driving conditions. Re-
place the filter according to the fol-
lowing procedure:
1. Open the hood and check the suc-
tion hose and air cleaner housing
for damage.
(1) Filter (3) Evacuator Valve
(2) Cap
REPLACING AIR CLEANER FIL-
TER (AF)
Use only a KIOTI genuine lter.
Use of a non-recommended l-
ter can cause damage to the
engine.
Make sure that no dust enters
the system by installing the
cover rmly.
When removing the filter, be
careful not to let foreign mate-
rial enter the air inlet.
When installing the cover, make
sure that the dust collection valve
is heading down.
2. Unscrew the air cleaner clip and
remove the cover.
3. Clean the inside of the air cleaner
housing by blowing compressed
air through it.
4. Replace the filter and check the
housing for damage.
5. Install the cover and x it with the
clip.
CAUTION
NOTE
H61O736A
FLUSH COOLING SYSTEM AND
CHANGING COOLANT (AJ)
(1) Drain Cock
1. Stop the engine and let it cool.
2. To drain the coolant, open the ra-
diator drain cock and remove radi-
ator cap. The radiator cap must be
removed to completely drain the
coolant.
3. After all coolant is drained, close
the drain cock.
4. Fill with clean water and cooling
system cleaner.
5. Follow the cleaner manufacture’s
instruction.
H61O737A
To Next Page
Loading...
