1. Disengage the P.T.O, lower all
implements, place all control le-
vers in the neutral position, set
the parking brake, stop the engine
and remove the key.
WHEN PARKING THE TRACTOR
T66O120a
(1) P.T.O Shaft Cover
(2) P.T.O Shaft Cap
WHEN OPERATING THE P.T.O.
1. Make sure the tractor is complete-
ly stopped, gears are in neutral
and all moving components have
completely stopped before con-
necting, disconnecting, adjusting,
cleaning or servicing any P.T.O
driven equipment.
2. Keep the P.T.O shaft cover in
place at all times. Replace the
P.T.O shaft cap when the shaft is
not in use.
3. Before installing or using P.T.O
driven equipment, read the manu-
facturer's manual and review the
H61O103a
T66O122a
saf ety l abel s at tach ed t o th e
equipment.
4. When operating stationary P.T.O
driven equipment, always ap-
ply the tractor parking brake and
place chocks behind and in front
of the rear wheels. Stay clear of all
rotating parts.
5. Do not attach a PTO driven im-
plement if the implements safe-
ty shields are damaged or not in
place. Rotating shafts are an en-
tanglement hazard.
To Next Page
Loading...
