H61O727A
The fuel filter is installed under the
engine cover on the right side of the
engine.
1. Close the fuel cock and clean the
area around the lter bowl.
2. Remove the filter after disengag-
ing the ring and removing the lter
bowl.
REPLACING FUEL FILTER (S)
3. After cleaning you should reas-
semble the new filter element,
making sure that it is free from
dus t an d di rt. Ass ure tha t al l
O-rings are in place.
4. B l e ed t h e f u e l s y st e m . ( S e e
"Bleeding the fuel System" in the
service section)
(1) Fuel Cock (5) Spring
(2) Fuel Filter Head (6) O-ring
(3) O-ring (7) Filter Bowl
(4) Filter Element (8) Screw Ring
(A) Close (B) Open
(C) Air Bleeding
If dust and dirt enters the fuel
system, the fuel pump and in-
jection nozzles are subject to
premature wear. To prevent
this, be sure to clean the fuel
lter bowl and element period-
ically.
IMPORTANT
H61O728A
(1) Element (2) Cap
(3) Evacuator Valve
1. The air cleaner uses a dry ele-
ment. Never apply oil.
2. Dust should not accumulate in
the evacuator valve. Remove and
clean it every week. If the tractor is
operated in extremely dusty condi-
tions, daily inspection is required.
3. If the element is stained with car-
bon , dust or oil, replace the lter.
4. Change the element every 1 year
or every 100 hours which ever
comes rst.
REPLACING AIR CLEANER
PRIMARY ELEMENT (T)
To Next Page
Loading...
