S41O504A S41O505A S41O506A
6. SET THE THROTTLE LEVER TO
ABOUT HALF WAY
7. INSERT THE KEY INTO THE KEY
SWITCH AND TURN IT “ON”.
MAINTAIN IT UNTIL THE PRE-
HEAT LAMP IS TURNED OFF (AP-
PROX. 8 SEC.)
5. MOVE THE POSITION CONTROL
LEVER FORWARD.
To lower implement, move the posi-
tion control lever forward.
(1) Position Control Lever
(A) “DOWN”
(1) Hand Throttle Lever
“INCREASE”
“DECREASE”
(1) Key Switch
( ) Off ( ) Manual Pre-Heat
( ) Start ( ) On(
Auto Pre-Heat
)
To Next Page
Loading...
