For the manual model, it can-
not be started while the shuttle
lever or PTO is engaged.
IMPORTANT
8. Insert the key into the key switch
and turn it "ON". Maintain it until
the preheat lamp is turned off. (Ap-
prox. 8 sec)
Start Condition (HST): Opera-
tor on the seat + Depressing
brake pedal. (Range shift le-
ver, PTO and Mid PTO levers
should be in neutral position)
Start Condition (Mechanical):
Operator on the seat + De-
pressing brake pedal. (Shuttle
lever, PTO and Mid PTO levers
should be in neutral position)
Operation continuance con-
dition when operator leaves
from the seat: Parking brake
ON + Shuttle (HST) lever is in
neutral position.
In any other condition, the
tractor stops operation by it-
self in 2 sec of time delay.
IMPORTANT
(1) Key Switch
(A) Pre-heat (B) Stop
(C) ACC (D) ON
(E) Start
TE1O405A
To Next Page
Loading...
