Kioti NX5510 User Manual (English)

Questions and Answers:

D
Derrick HigginsAug 14, 2025
Why is my Kioti NX5510 Tractor engine difficult to start?
- R
  rivaschristopherAug 14, 2025
  Your Kioti Tractor engine may be difficult to start due to several reasons. The fuel might be thick, restricting its flow, so check the fuel tank and fuel filter. Air or water in the fuel system can also prevent the fuel pump from working correctly. Thick carbon deposits on the injection nozzle, often caused by water or dirt in the fuel, can also be a culprit; clean the nozzle carefully. In cold weather, thick engine oil can slow the engine's cranking; consider changing the oil grade. Finally, incorrect valve clearance can cause starting issues; in this case, it is recommended to contact your KIOTI dealer to adjust the valve clearance.
T
Todd ConwayAug 17, 2025
How to fix a Kioti NX5510 Tractor clutch that is not operating properly?
- S
  Sarah DuncanAug 17, 2025
  If the clutch on your Kioti Tractor isn't operating properly, there are several potential causes. If the clutch slips (idles), check and adjust the clutch pedal play. If the pedal is incorrectly adjusted, adjust the pedal play. If the clutch lining is worn or stuck, or if the clutch cannot be disengaged due to a corroded clutch lining, it is recommended to have it replaced or repaired in a workshop.
L
Lucas JonesAug 20, 2025
How to improve insufficient output on my Kioti NX5510?
- A
  alexisgoldenAug 20, 2025
  If your Kioti Tractor's output is insufficient, several factors could be responsible. First, check the air cleaner; if it's dirty, clean or replace the element every 100 to 200 hours of operation. Also, incorrect fuel injection pressure can cause this issue; adjust it to 150 to 160 kgf/cm2 or replace the injection nozzle. Finally, improper valve adjustment can lead to insufficient output; in this case, it is recommended to contact your KIOTI dealer to adjust to proper valve clearance.
S
Sara KnappAug 25, 2025
What to do if the hydraulic system is faulty in my Kioti NX5510 Tractor?
- H
  Hayley HoganAug 25, 2025
  If you're experiencing issues with your Kioti Tractor's hydraulic system, there are a few things you can check. If oil is leaking from a pipe or hose, make sure the pipe clamp is tightened. If the 3-point hitch cannot be lowered, ensure the lowering speed control lever is not set to the stop position. If the 3-point hitch cannot be lifted, check the transmission fluid level and add more if it's insufficient. Also, check for air in the intake pipe and bleed it if necessary. Finally, a clogged oil filter can cause hydraulic issues, so clean or replace it.
M
Melissa BranchAug 27, 2025
What to do if the brake is not operating properly on my Kioti NX5510 Tractor?
- B
  Brittany AndersonAug 27, 2025
  If the brake on your Kioti Tractor is not operating properly, consider these potential solutions. If the brake does not operate or only one brake pedal operates, adjust the brake pedal play if it's excessive. If the brake pedal does not return properly, replace the brake return spring if it's damaged. If grease is insufficient on each mating surface, remove rust and apply grease. If the brake lining is worn or stuck, it is recommended to have it replaced in a workshop.
Y
Yolanda SchultzAug 30, 2025
What to do if my Kioti NX5510 does not move while the engine is running?
- C
  Charles GravesAug 31, 2025
  If your Kioti Tractor doesn't move while the engine is running, first check that the shift levers are not in neutral position. Also, make sure the parking brake is released.

Kioti NX5510 Specifications

General

Fuel Capacity	13.2 gallons
Rated Speed	2, 600 rpm
Brakes	Wet Disc
Hydraulics Type	Open Center
PTO Speed	540 rpm
Transmission	HST or Synchro Shuttle
Steering	Power steering
3-Point Hitch Category	Category I
PTO	Independent
Operating Weight (ROPS Model)	3, 527 lbs (1, 600 kg)
3-Point Hitch	Category I
Engine Type	Diesel

Summary

FOREWORD

ISO 3600 EU STANDARDS

SAFETY AND VEHICLE DAMAGE WARNING

WARNING

Indicates conditions that may result in harm or death. Follow advice.

CAUTION

Indicates conditions that may cause vehicle damage. Follow advice.

IMPORTANT

Emphasizes notable characteristics of working procedures or technology.

NOTE

Indicates interesting or helpful information is being provided.

UNIVERSAL SYMBOLS

SAFETY PRECAUTIONS

PRECAUTIONS BEFORE OPERATION

Guidelines and general advice before operating the tractor.

PRECAUTIONS DURING OPERATION

Safety measures to follow while operating the tractor.

SAFETY PRECAUTIONS DURING SERVICING

Safety measures to take when performing maintenance.

SAFETY PRECAUTIONS WHEN USING THE LOADER

Specific safety advice for operating the loader attachment.

SAFETY DECAL MAINTENANCE

Information on maintaining and caring for safety decals.

Precautions before operation

Vehicle identification number

Information on identifying the tractor via serial and engine numbers.

Essential replacement part

Lists crucial parts that may need replacement.

SPECIFICATIONS

General specifications

Overall specifications including dimensions and general data.

TRAVELING SPEED

Information on the tractor's different traveling speeds.

IMPLEMENT LIMITATIONS

Details on the size limitations for compatible implements.

DESCRIPTION OF OPERATING SYSTEM

EXTERIOR VIEW [CABIN]

Identifies external components of the tractor cabin.

EXTERIOR VIEW [ROPS]

Identifies external components of the tractor with ROPS.

SWITCH

Details the location and function of various switches on the tractor.

INSTRUMENT PANEL

Explains the symbols and indicators on the tractor's instrument panel.

OPERATION

PRE-OPERATION

Steps and checks to perform before initial tractor operation.

Initial operation

Guidelines for the first 10-20 hours of tractor operation.

OPERATING THE ENGINE

Procedures for starting, warming up, and stopping the tractor engine.

OPERATING THE TRACTOR

Step-by-step instructions for driving and operating the tractor.

PARKING

TURNING

DRIVING ON SLOPE

THE CAUTIONS WHEN COMING IN AND OUT OF PAVED ROAD

Advice for safely entering/exiting fields and driving on slopes.

LOADING INTO AND UNLOADING OUT OF THE TRUCK

Precautions when using power steering

3-POINT HITCH CONTROL SYSTEM

POSITION CONTROL

How to use the position control lever for the 3-point hitch.

DRAFT CONTROL

3-POINT HITCH IMPLEMENT AND LOADER OPERATION

REMOVAL AND INSTALLATION OF 3-POINT HITCH IMPLEMENT (WITH PTO SHAFT)

Procedures for attaching and detaching implements with PTO shaft.

OPERATION TIP FOR 3-POINT HITCH ELEMENTS

Tips for adjusting and using 3-point hitch components effectively.

HANDLING LOADER

Instructions and safety advice for operating the front loader.

MAINTENANCE

MAINTENANCE CHECK LIST

A list of daily and scheduled maintenance tasks.

LUBRICANTS

Recommended types and locations for lubrication.

MAINTENANCE CODE

Codes and procedures for specific maintenance tasks.

STORAGE AND DISPOSAL

TRACTOR STORAGE

Guidelines for storing the tractor for daily and long-term periods.

USING TRACTOR AFTER STORAGE

Steps to follow to prepare the tractor after a storage period.

USAGE AND DISPOSAL

Guidance on the proper use and disposal of the tractor and its fluids.

TROUBLESHOOTING

ENGINE TROUBLESHOOTING

Identifies common engine issues and their solutions.

TRACTOR TROUBLESHOOTING

Identifies common tractor operational issues and their solutions.

Related product manuals

Kioti NX5510 User Manual

Table of Contents

Questions and Answers:

Kioti NX5510 Specifications

Summary

FOREWORD

ISO 3600 EU STANDARDS

SAFETY AND VEHICLE DAMAGE WARNING

WARNING

CAUTION

IMPORTANT

NOTE

UNIVERSAL SYMBOLS

SAFETY PRECAUTIONS

PRECAUTIONS BEFORE OPERATION

PRECAUTIONS DURING OPERATION

SAFETY PRECAUTIONS DURING SERVICING

SAFETY PRECAUTIONS WHEN USING THE LOADER

SAFETY DECAL MAINTENANCE

Precautions before operation

Vehicle identification number

Essential replacement part

SPECIFICATIONS

General specifications

TRAVELING SPEED

IMPLEMENT LIMITATIONS

DESCRIPTION OF OPERATING SYSTEM

EXTERIOR VIEW [CABIN]

EXTERIOR VIEW [ROPS]

SWITCH

INSTRUMENT PANEL

OPERATION

PRE-OPERATION

Initial operation

OPERATING THE ENGINE

OPERATING THE TRACTOR

PARKING

TURNING

DRIVING ON SLOPE

THE CAUTIONS WHEN COMING IN AND OUT OF PAVED ROAD

LOADING INTO AND UNLOADING OUT OF THE TRUCK

Precautions when using power steering

3-POINT HITCH CONTROL SYSTEM

POSITION CONTROL

DRAFT CONTROL

3-POINT HITCH IMPLEMENT AND LOADER OPERATION

REMOVAL AND INSTALLATION OF 3-POINT HITCH IMPLEMENT (WITH PTO SHAFT)

OPERATION TIP FOR 3-POINT HITCH ELEMENTS

HANDLING LOADER

MAINTENANCE

MAINTENANCE CHECK LIST

LUBRICANTS

MAINTENANCE CODE

STORAGE AND DISPOSAL

TRACTOR STORAGE

USING TRACTOR AFTER STORAGE

USAGE AND DISPOSAL

TROUBLESHOOTING

ENGINE TROUBLESHOOTING

TRACTOR TROUBLESHOOTING

Related product manuals