If trying to lift an object with
e x c e s s i v e w e i g h t b y t h e
3-point hitch while the tractor
is not equipped with proper
front suit case weights, the
fr ont whee ls m ay b e lifte d
instead, leading to roll over.
Make sure to follow the speci-
cations for use.
WARNING
DRAFT CONTROL
(1) Draft Control Lever
(A) Lowering
1. The draft control function is used
to prevent the wheels from rotating
idle and the engine from stopping
due to excessive draft load when
the tractor is used for work which
requires a lot of draft, such as
plowing.
TE1O516A
(1) Top Link
2. The draft function is activated
when the lowest or middle hole on
the top link of the 3-point hitch is
used. The lowest hole is for sensi-
tive draft control.
TE1O517A
To Next Page
Loading...
